0HP Dual Multiple and Dual Swap
RENEMULT is a 0HP utility module consisting of two 1 to 3 multiples and two swap units.
Any CV signal at the multiple inputs will be multiplied to the three corresponding outputs. The last output provides an inverted signal.
The input signal may be attenuated with a potentiometer.
The multiple inputs are normalized to the swap inputs.
The Swap Unit exchanges the destination of one or two sources via a push button switch. This way you can route two signals to the corresponding destination of the other input.
You will need the RENEPOW Module to power this 0HP Module.
Please note the safety information stated in the BOM!
- Two Indiviual Buffered Multiples
- 1 to 3 Multiples with Inverted Output
- CV Attenuator Multiple
- Two Individual Swap Units
- Two Push Button Switches
- Wrong polarity protection
- XU Eurorack module, 0HP
- Power consumption: 25 mA at +12 V and 20 mA at -12V