Additional information
| Weight | 45 g |
|---|---|
| Dimensions | 10 × 10 × 2 mm |
| description | Synthesiser parts/components |
Norns Shield (v191106) pcb only (part populated) w/ unsoldered SMD codec & crystal & jack sockets to complete the build
£29.99 (exc VAT)
This listing is for a part smd populated Norns shield pcb.
All passives are pre-soldered, audio codec and crystal are included separately but you will need to solder them your self.
minimal/tiny open-source/DIY shield for Raspberry Pi boards, providing hardware compatibility with the norns ecosystem.
- audio codec: CS4270
- audio jacks: 3.5mm stereo in/out, line level
- OLED: NHD-2.7-12864WDW3
- 3x pushbuttons, 3x rotary encoders
see the full BOM on Octopart
BOM is missing the header for the oled screen: 20 pin female 10mm high and corresponding male header strip to solder to the screen.
Raspberry Pi header – Mouser part number – 485-1992
see https://llllllll.co/t/diy-norns-shield for discussion.
Out of stock
