FULL KIT (SMD pre soldered) – ANTUMBRA – ATOM v1.2 (mini Elements) 18hp with anodized aluminium panel

£159.99 (exc VAT)

ATOM

MINI ELEMENTS

ATOM is a smaller redesign of the Mutable Instruments Elements module by Emilie  Gillet.

This listing is for a full kit, SMD is presoldered, only the control boards and jacks and pots and push button need to be soldered by you.

The optional 5 resistors and leds for the jack lights can be a good introduction to SMD soldering, or you can just leave them off.
PLEASE NOTE ORIENTATION OF PUSH BUTTON, THE WHITE MARK ON THE SWITCH BODY MUST MATCH THE DOT ON THE PCB!!!
CC-by-SA Emilie Gillet

 

In stock

Description

ATOM from Antumbra is MI Elements in a compact size.

TECHNICAL SPECS

CURRENT DRAW:
◦ +12V: 130mA
◦ -12V: 10mA
◦ +5V: 0mA
DIMENSIONS:
◦ WIDTH: 18HP
◦ DEPTH: 33mm

RESOURCES

To calibrate the unit:

  1. Disconnect all CV inputs.
  2. Connect the note CV output of a well-calibrated keyboard interface or MIDI-CV converter to the V/OCT input.
  3. Set all attenuverters to their minimum position (7 o’clock), then hold the PLAY button for five seconds. This is the “secret handshake” to enter the calibration procedure. The exciter LED blinks to indicate that calibration is in progress.
  4. Send a voltage of 1V to the CV input.
  5. Press the PLAY push-button. The resonator LED blinks.
  6. Send a voltage of 3V to the CV input.
  7. Press the PLAY push-button.
  8. Calibration is done! To avoid entering the calibration mode by mistake, make sure that at least one attenuverter is moved to another position

Additional information

Weight 300 g
Dimensions 128.5 × 90 × 50 mm
description

Synthesiser parts/components

You may also like…