BUILT MODULE – ST Modular – MAIN (Stereo Sum) – 8hp FR4 panel

£69.99 (exc VAT)

ST Modular Website

BOM

ST Modular FB build group

YOU WILL NEED AT LEAST ONE STEREO SUM “CHANNEL MODULE” TO HAVE A FUNCTIONAL UNIT!

This listing is for a  BUILT MODULE with mounting screws.

You will need a 16 pin multi connector or flying bus connector cable to connect this module to the channel modules.

You must source the other parts to complete the module yourself.

In stock

Description

A Modular Eurorack Stereo Mixer

YOU WILL NEED AT LEAST ONE STEREO SUM “CHANNEL MODULE” TO HAVE A FUNCTIONAL UNIT!

STEREO SUM is a stereo mixer with a customizable amount of stereo channels. You can decide yourself how many SUM CHANNELS you want to build and add to your SUM MAIN module. They are all connected via a flying bus cable and standard ribbon cables on the back. You can start with two channels and extend the mixer according to your needs and HP available.

Each CHANNEL has a mute switch, a one knob EQ, Pan, a Send knob that can be routed to two different destinations, a Level pot and an AFL (after fade listening) functionality, which allows you to audit your sounds on the headphones before you add them to the mix. Fully counter-clockwise the channel is only routed to the headphones (AFL), turning it clockwise it will be smoothly subtracted from the headphone out and added to the main mix (Mix).

The SUM MAIN module has all output, send and return jacks, a master volume knob and a 6.3mm stereo headphone jack with a dedicated volume potentiometer. The Mix to AFL knob routes the main mix output to the headphone out in order to compare the channels that are in AFL mode with the main mix. This can be deactivated with a switch to only audit channels that are currently not send to the main output (AFL mode). Additionally there is a stereo input to integrate other mixers, like PHOEBE, SUM or uSUM for example.

All inputs can also handle mono signals. The send channels can be set to be active either pre or post AFL per channel via a solder bridge. ‚Pre‘ means you can still hear the send/return way when it is in AFL mode (thus the channels signal is actually not audible in the main mix), ‚post‘ means send/return will only work when the channels signal is routed to the main mix. Each channel has two separate GAIN trimmer potentiometers adjustable from the front.

STEREO SUM is a true performance mixer aiming to be used in live situations.

Details:
• Stereo Mixer
• Customizable Amount of Stereo Channels
• EQ per Channel
• Two Send/Returns
• AFL Mode to Audit Sounds
• Mute Switch per Channel
• Stereo Input to Integrate other Mixers
• Mix to Headphone Knob for Sound Comparison
• Skiff Friendly
• Wrong Polarity Protection
• 3U Eurorack module, 8 HP + 6 HP + N HP wide
• Power consumption: 65 mA at +12 V and 42 mA at -12 V for SUM MAIN and one SUM CHANNEL

http://www.st-modular.com

  • 25 mA +12V
  • 15 mA -12V
  • 0 mA 5V
  • 30 mm deep

Additional information

Weight 155 g
Dimensions 128.5 × 10 × 6 mm
description

Synthesiser parts/components

You may also like…