16n Fader Bank populated pcb (SMD pre-soldered)

£35.99 (exc VAT)

16n Fader Bank pcb


This is 16n. It is a bank of 16 60mm faders. It is designed for controlling electronic musical instruments and devices.

This listing is for an SMD populated and pre-soldered pcb.

Full kits will be available as soon as the new batch of panels arrives.

Faders for this pcb are available here:


In stock

SKU: 100972 Categories: , , , , Tags: , , ,




picture by Tom Armitage

What is that thing?

This is 16n. It is a bank of 16 60mm faders. It is designed for controlling electronic musical instruments and devices. Everything you need to make one is at its Github repository.

What does it do?

You move faders on it. It emits output.

It has a number of outputs:

  • it sends MIDI data over USB; by default, a different continuous controller for each fader.
  • it sends MIDI data over a 3.5mm stereo (TRS) jack, which you can break out using any available converter. There is a switch to toggle between the two standards for this (so it’ll work with both Korg/Makenoise and Arturia/Novation products and converters directly). This can be the same CCs as the MIDI over USB, or different ones, if you’d like.
  • it sends 0-5V CV out of sixteen jacks, one for each fader. (Well, almost 5V, dependent on your USB power supply)
  • it sends data over I2C, using a TRS jack: either as a master device, which could connect directly to (e.g.) an ER-301 or monome Ansible, or as a bus device for a monome Teletype

All outputs are sent simultaneously.

16n is built around a Teensy microcontroller, and is written in Arduino-style C++; you can edit it all through the Arduino IDE. You can easily configure options via a config file, or write your own firmware, if you prefer.

16n is entirely open source: the code is MIT licensed; the hardware is Creative Commons.

The user guide is in the main README.

Can you give me some examples of what people are doing with it?


[youtube https://www.youtube.com/watch?v=edriUxDgTsg][youtube https://www.youtube.com/watch?v=gEjbc87Cu9c][youtube https://www.youtube.com/watch?v=gaxW51dK7Dk?rel=0]

How do I get one?

Right now: you make one yourself. Everything you need to make one can be found at the github repository.

That means you’ll need to:

Everything is entirely open source. If you know what an “Ornament and Crime” synth module is: it’s a bit like that. And of course, you’re be able to make your own modifications and customisations.

If that sounds like gibberish to you, you might want to try to find a friendly music-DIY type to build one for you. Right now, the only way to get a 16n is to make it yourself.

There may be other options in the future.

How much does it cost?

“It depends”.

The bill of materials varies depending on how many you’re making at once. For instance, the circuit boards work out at around $240 for 3 from OSHPark, but can go down to around $50 for 5 from Chinese manufacturers. The 60mm Alps faders come down substantially in price when you buy them in bulk. And the panel price will vary depending on how you make it – lasercut plastic or ply will be very different to metal, for instance.

I have some problems with my 16n

Sorry to hear that. 16n is an open-source product, so there’s limited capacity for us to support it. But: you should raise an Issue on the 16n github. That way the community can also see the issue, and we can see if we can get it resolved. Note that 16n is open source; support is offered entirely on a voluntary basis.

I’d like to test my 16n

Great. You can use the browser test page in Google Chrome to test the USB-MIDI output – useful for quick debugging.

I have ideas for changes / an improvement I wish to share / a version I wish to make


If you have an idea for a change… perhaps raise it as an Issue with a ‘suggestion’ label?

If you have an improvement you wish to share, a Pull Request against the main repository would be ideal; we’ll see if we can’t fold it in somehow.

If you have your own version: that’s awesome. Remember that the hardware is licensed CC-BY-SA, so you must correctly credit everyone involved in the initial version, and also share your own changes with the similar license. So you can’t make a fork of 16n that you don’t open-source yourself.

Who’s making this?

So far: Brian Crabtree, Sean Hellfritsch, Tom Armitage, Brendon Cassidy.

This is a community project that emerges from the Lines forum. Brian Crabtree and Sean Hellfritsch made the first version. Tom Armitage redesigned the electronics, primarily adding CV and MIDI outs; Tom and Brendon Cassidy extended the firmware; Brendon’s contributions to the I2C code must be noted in particular.

Where can I find out more?

There’s not a mailing list or anything. There is, however, this thread on lines to support the official release. And there’s also this sprawling thread on lines, where you can follow the story of its creation.

Talking about 16n

I recommend #16nfaderbank as hashtag for talking about 16n, for reasons. (The more obvious hashtag already appears to have less savoury connotations.)

Additional information

Weight 110 g
Dimensions 249 × 121 × 2 mm

Synthesiser parts/components

You may also like…