{"title":"Sample \u0026 Hold","description":"","products":[{"product_id":"mutated-kinks","title":"KINKS","description":"\u003cp id=\"features\"\u003e\u003ca href=\"https:\/\/github.com\/pichenettes\/eurorack\"\u003eGithub - BOM\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003ch3 id=\"three-essential-utility-functions\"\u003eThree essential utility functions\u003c\/h3\u003e\n\u003ch4 id=\"sign-section\"\u003eSIGN section\u003c\/h4\u003e\n\u003cp\u003eThis section consists of a precision signal inverter, and half- and full- wave rectifiers (which respectively clips to 0V, and inverts the negative half of the signal).\u003c\/p\u003e\n\u003cp\u003eThey can help in creating new LFO shapes, add overtones to audio signals or even transform CV melodies.\u003c\/p\u003e\n\u003ch4 id=\"logic\"\u003eLOGIC\u003c\/h4\u003e\n\u003cp\u003eAn analog\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOR\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003egate outputs the maximum of two signals: not only it can merge two streams of triggers\/gates like its digital counterparts, but it can also hybridizes LFOs, envelopes or even audio signals – creating the same type of inharmonic side-bands as ring-modulators.\u003c\/p\u003e\n\u003cp\u003eThe analog\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAND\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003egate outputs the minimum of the two signal. With it you can mute\/un-mute a stream of triggers with another gate, or explore other shades of audio and CV mangling.\u003c\/p\u003e\n\u003ch4 id=\"sh\"\u003eS\u0026amp;H\u003c\/h4\u003e\n\u003cp\u003eA no-nonsense implementation of a classic synthesizer circuit.\u003c\/p\u003e\n\u003cp\u003eOn each trigger received on the TRIG input, the output voltage takes the value of the input voltage and holds this voltage.\u003c\/p\u003e\n\u003cp\u003eThe signal input\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIN\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis normalized to a white noise generator – to easily generate stepped random values.\u003c\/p\u003e\n\u003cp\u003eThe white noise signal is also available through the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNOISE\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eoutput jack.\u003c\/p\u003e\n\u003ch3 id=\"specifications\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll inputs DC-coupled.\u003c\/li\u003e\n\u003cli\u003eAll circuits handle audio-rate signals.\u003c\/li\u003e\n\u003cli\u003eInput impedance: 66k for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eRECTIFY\u003c\/strong\u003e, 90k for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eLOGIC\u003c\/strong\u003e, 1M for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eS\u0026amp;H\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;H\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eTRIG\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003einput edge detector: minimum pulse width: 25µs. Maximum slew rate: 0.2V\/ms.\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;H sampling time: 100µs.\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;H droop rate: \u0026lt;0.8mV\/s.\u003c\/li\u003e\n\u003cli\u003eNoise output: flat from 10 Hz to 30kHz (-6dB\/octave rolloff beyond), standard deviation = 1.8V +\/- 10%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCode (AVR projects): GPL3.0.\u003c\/p\u003e\n\u003cp\u003eCode (STM32F projects): MIT license.\u003c\/p\u003e\n\u003cp\u003eHardware: cc-by-sa-3.0\u003c\/p\u003e\n\u003cp\u003eBy: Emilie Gillet (\u003ca href=\"mailto:emilie.o.gillet@gmail.com\"\u003eemilie.o.gillet@gmail.com\u003c\/a\u003e)\u003c\/p\u003e","brand":"MUTATED","offers":[{"title":"pcb only","offer_id":57194061299976,"sku":"1000100","price":6.99,"currency_code":"GBP","in_stock":true},{"title":"black anodized aluminium panel only","offer_id":57194061332744,"sku":"1000100-1","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/0902\/6312\/files\/Kinks-panel_10d47e2e-2184-43b3-9c16-72e4a3f06a30.jpg?v=1776361415"},{"product_id":"st-modular-zeitreise","title":"ZEITREISE \/ sample \u0026 hold, slew limiter and meandering cv generator \/ 6 HP","description":"\u003csection id=\"comp-lladfhki4\" class=\"Oqnisf comp-lladfhki4 wixui-section\" tabindex=\"-1\"\u003e\n\u003cp\u003e\u003cspan class=\"Wp-Modular-Schrift-1-C Sz-Modular-Schrift-1-C-120px\"\u003e\u003cem\u003e\u003cspan\u003eZEITREISE is about the slow sequence of events that helps to take voltage on a journey through time. Its your perfect tool for creating slow and unpredictable parameter changes via control voltage.\u003c\/span\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-foo\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eZEITREISE is the German term for \"time travel\" and the time in this context is a clock signal that is set using the S\u0026amp;C CLK potentiometer on the top of the module. It´s rate can be as slow as 0.2 Hz (\u003c\/span\u003e\u003cspan\u003eapproximately \u003c\/span\u003e\u003cspan\u003e12 bpm) and as fast as 21 Hz (approximately 1,236 bpm). This clock signal is sent to the internal Sample \u0026amp; Hold (S\u0026amp;H) circuit. A S\u0026amp;H circuit in modular synthesizers captures and holds voltage samples at specific intervals, usually triggered by an external clock, creating a stepped output that is useful for generating random or sequenced voltages for modulation. With ZEITREISE, any voltage applied to the S\u0026amp;H CV input is sampled, held and output to the S\u0026amp;H OUT socket with each clock pulse received, either externally via the S\u0026amp;H CLK input or, if this input is not patched, via the internal clock generator. You can reduce the voltage applied to the S\u0026amp;H CV input with the corresponding attenuator.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-0k36e9627\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cbr role=\"presentation\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-mjy3m9616\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eThe S\u0026amp;H output is forwarded to a slew limiter. A slew limiter smoothes or limits abrupt voltage changes and ensures controlled slew rates of the input signals, resulting in smoother transitions and curved waveforms for modulation and sound shaping. The amount of slew rate that attenuates the voltage changes can be increased by turning the SLEW IN potentiometer to the right. You can also feed external CVs, such as pitch voltages, into ZEITREISE via the SLEW IN socket. This allows you to create a portamento effect for tonal sequences.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-8spo79636\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cbr role=\"presentation\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-s4ycy9618\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eBelow the S\u0026amp;H and slew limiter you will find three meandering CV outputs REISE EINS, REISE ZWEI and REISE DREI that slowly change their voltage levels (+0V to +8V). The voltages come from different stages within the same circuit. Take these voltages from the REISE outputs and reduce their voltage levels with the appropriate attenuators. Please note that the LEDS display the voltage levels before the attenuators to provide better feedback on the status of each REISE output. These voltages are great for slowly controlling external parameters such as sample playback points in samplers, filter cutoff frequencies or timbre and harmonics in oscillators.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-z6knw9645\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cbr role=\"presentation\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-r36ng9620\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eThere is an additional output at the bottom, which supplies either the clock from the S\u0026amp;H CLK input (patched or normalized) or white noise. You can select one of these outputs using a jumper on the back of the module.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-foo\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cstrong\u003e\u003cspan\u003ekey features\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"flj0N M4Ji4\"\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-tpq3n14927\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eClock Generator\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-svxl71757\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eSample \u0026amp; Hold\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-e51gm14930\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eSlew Limiter\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-9zel914933\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003e3x Slowly Meandering CV\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-hbync14936\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eNoise Generator\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-a1o6t3284\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eInternal Normalizations\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-90mj515544\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eSkiff Friendly\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-v9srr14945\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eWrong Polarity Protection\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-l493g675718\"\u003e\u003c\/p\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-gblqp522058\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cstrong\u003e\u003cspan\u003especs \u0026amp; downloads\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"flj0N M4Ji4\"\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-sh5l2522062\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003ewidth: 6 HP\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-r0u9d522065\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003edepth: 30 mm\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-5fak8522068\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003epower: 60 mA @ +12V \/ 45 mA @ -12V\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-igis614085\"\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.st-modular.de\/file-share\"\u003e\u003cspan class=\"Wp-Modular-Schrift-1-C Sz-Modular-Schrift-1-C-120px\"\u003eBuild docs\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.st-modular.de\/\"\u003ehttps:\/\/www.st-modular.de\/\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/section\u003e","brand":"ST MODULAR","offers":[{"title":"pcb\/panel set","offer_id":57194086236424,"sku":"001000051-3","price":15.99,"currency_code":"GBP","in_stock":true},{"title":"smd pre-soldered pcba \u0026 panel","offer_id":57194086269192,"sku":"001000051-4","price":39.99,"currency_code":"GBP","in_stock":true},{"title":"full kit (SMD pre-soldered)","offer_id":57194086301960,"sku":"001000051-2","price":59.99,"currency_code":"GBP","in_stock":true},{"title":"built module","offer_id":57194086334728,"sku":"001000051-1","price":83.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/0902\/6312\/files\/20240920_134231.jpg?v=1776361515"},{"product_id":"st-modular-cause-effect-1u-intellijel","title":"CAUSE \u0026 EFFECT \/ Voltage Reader, Sample \u0026amp; Hold and Gate Switch \/ 1U Intellijel \/ 20hp","description":"\u003cp class=\"lead wrap\"\u003e\u003cem\u003e\u003cspan\u003eIntroducing the Cause \u0026amp; Effect module – the maestro of musical mischief in your Eurorack setup. It's like the conductor of a whimsical symphony, where flipping switches and twiddling knobs creates a chain reaction that turns chaos into pure sonic magic. Who knew that cause and effect could be this much fun?\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe first unit is a VOLTAGE READER, that outputs a gate signal according to a limit set with the help of the READ LIMIT potentiometer. If the limit set is reached by the incoming voltage, the R GATE output will be high. The limit may also be controlled via external control voltage at the LIMIT CV jack. Any voltage applied to READ IN is normalised to HOLD IN and IN A. R GATE is normalised to H GATE and SW GATE. This way only one signal is necessary to control both other units.\u003c\/p\u003e\n\u003cp\u003eThe second unit is called HOLD. In one mode it can sample and store a voltage from the HOLD IN jack and supply it at the HOLD OUT jack, if gate at H GATE is high. In another mode it can pass through the incoming voltage when gate is high. It then samples and stores the last voltage value applied when gate switches to low. The modes are selectable via the HOLD MODE switch.\u003c\/p\u003e\n\u003cp\u003eThe third unit is a GATE SWITCH. If a gate signal is applied to the SW GATE input only IN B will be connected to the A or B output jack. If gate is low IN A is available at the output. IN A is inverted and normalised to IN B.\u003c\/p\u003e\n\u003cp\u003eThis module is also available in 1U\u003ca href=\"https:\/\/pushermanproductions.com\/product\/built-module-st-modular-cause-effect-1u-pulp-logic\/\"\u003e Pulp Logic\u003c\/a\u003e \u0026amp; \u003ca href=\"https:\/\/pushermanproductions.com\/product\/built-module-st-modular-cause-effect-1u-intellijel\/\"\u003eIntellijel\u003c\/a\u003e formats.\u003c\/p\u003e\n\u003cp\u003eDetails:\u003c\/p\u003e\n\u003cp\u003e• Three Utility Tools\u003c\/p\u003e\n\u003cp\u003e• Voltage Reader for Gates\u003c\/p\u003e\n\u003cp\u003e• Hold for Sampled Voltages\u003c\/p\u003e\n\u003cp\u003e• Gate Switch for Selectable Voltages\u003c\/p\u003e\n\u003cp\u003e• Two Hold Modes\u003c\/p\u003e\n\u003cp\u003e• Inputs Normalised \u003c\/p\u003e\n\u003cp\u003e• Skiff friendly\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e35 mA +12V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e31 mA -12V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0 mA 5V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e30 mm deep\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e20 hp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"ST MODULAR","offers":[{"title":"pcb\/panel set","offer_id":57194094264584,"sku":"100033-1","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"full kit (SMD pre-soldered)","offer_id":57194094297352,"sku":"100033-2","price":39.99,"currency_code":"GBP","in_stock":true},{"title":"built module","offer_id":57194094330120,"sku":"100033-3","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/0902\/6312\/files\/CAUSE-EFFECT-1U-PULP-LOGIC-front.jpg?v=1779211681"},{"product_id":"st-modular-cause-effect-1u-pulp-logic","title":"CAUSE \u0026 EFFECT \/ Voltage Reader, Sample \u0026 Hold and Gate Switch \/ 1U Pulp Logic \/ 20hp","description":"\u003cp class=\"lead wrap\"\u003e\u003cem\u003e\u003cspan\u003eIntroducing the Cause \u0026amp; Effect module – the maestro of musical mischief in your Eurorack setup. It's like the conductor of a whimsical symphony, where flipping switches and twiddling knobs creates a chain reaction that turns chaos into pure sonic magic. Who knew that cause and effect could be this much fun?\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe first unit is a VOLTAGE READER, that outputs a gate signal according to a limit set with the help of the READ LIMIT potentiometer. If the limit set is reached by the incoming voltage, the R GATE output will be high. The limit may also be controlled via external control voltage at the LIMIT CV jack. Any voltage applied to READ IN is normalised to HOLD IN and IN A. R GATE is normalised to H GATE and SW GATE. This way only one signal is necessary to control both other units.\u003c\/p\u003e\n\u003cp\u003eThe second unit is called HOLD. In one mode it can sample and store a voltage from the HOLD IN jack and supply it at the HOLD OUT jack, if gate at H GATE is high. In another mode it can pass through the incoming voltage when gate is high. It then samples and stores the last voltage value applied when gate switches to low. The modes are selectable via the HOLD MODE switch.\u003c\/p\u003e\n\u003cp\u003eThe third unit is a GATE SWITCH. If a gate signal is applied to the SW GATE input only IN B will be connected to the A or B output jack. If gate is low IN A is available at the output. IN A is inverted and normalised to IN B.\u003c\/p\u003e\n\u003cp\u003eThis module is also available in \u003ca href=\"https:\/\/pushermanproductions.com\/product\/built-module-st-modular-cause-effect-1u-intellijel\/\"\u003e1U Intellijel\u003c\/a\u003e \u0026amp; \u003ca href=\"https:\/\/pushermanproductions.com\/product\/built-module-st-modular-cause-effect-3u\/\"\u003e3U\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDetails:\u003c\/p\u003e\n\u003cp\u003e• Three Utility Tools\u003c\/p\u003e\n\u003cp\u003e• Voltage Reader for Gates \u003c\/p\u003e\n\u003cp\u003e• Hold for Sampled Voltages\u003c\/p\u003e\n\u003cp\u003e• Gate Switch for Selectable Voltages\u003c\/p\u003e\n\u003cp\u003e• Two Hold Modes • Inputs Normalised\u003c\/p\u003e\n\u003cp\u003e• Skiff friendly \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e35 mA +12V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e31 mA -12V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0 mA 5V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e30 mm deep\u003c\/li\u003e\n\u003cli\u003e20hp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ST MODULAR","offers":[{"title":"pcb\/panel set","offer_id":57194094821640,"sku":"100034-1","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"full kit (SMD pre-soldered)","offer_id":57194094854408,"sku":"100034-2","price":39.99,"currency_code":"GBP","in_stock":true},{"title":"built module","offer_id":57194094887176,"sku":"100034-3","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/0902\/6312\/files\/CAUSE-EFFECT-1U-PULP-LOGIC.jpg?v=1779211897"},{"product_id":"st-modular-cause-effect-3u","title":"CAUSE \u0026 EFFECT 3U  \/ voltage reader, sample \u0026 hold and gate switch \/ 4 HP","description":"\u003cp\u003e\u003cem\u003e\u003cspan\u003eIntroducing the Cause \u0026amp; Effect module – the maestro of musical mischief in your Eurorack setup. It's like the conductor of a whimsical symphony, where flipping switches and twiddling knobs creates a chain reaction that turns chaos into pure sonic magic. Who knew that cause and effect could be this much fun?\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-foo\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eThe first unit is a VOLTAGE READER, that outputs a gate signal according to a limit set with the help of the READ LIMIT potentiometer. If the limit set (any voltage between -6V and +6V) is reached by the incoming voltage, the R GATE output will be high. The limit may also be controlled via external control voltage at the LIMIT CV jack. This so-called comparator outputs a gate with an amplitude of +\/-5V, which also makes it usable as a square wave generator with pulse with modulation via the READ LIMIT potentiometer. Any voltage applied to READ IN is normalised to HOLD IN and IN A. R GATE is normalised to H GATE and SW GATE. This way only one signal is necessary to control both other units.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-l2ip1235742\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cbr role=\"presentation\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-foado235735\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eThe second unit is called HOLD. In one mode it can sample and store a voltage from the HOLD IN jack and supply it at the HOLD OUT jack, if gate at H GATE is high. In another mode it can pass through the incoming voltage when gate is high. It then samples and stores the last voltage value applied when gate switches to low. The modes are selectable via the HOLD MODE switch.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-di4nx235748\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cbr role=\"presentation\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-9bldv235737\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eThe third unit is a GATE SWITCH. Apply a gate signal to the SW GATE input to route IN A or IN B to OUT. If the gate signal is high, IN A is switched through, and if the gate signal is low, IN B is switched through. When only IN A is connected and IN B is not, OUT produces an inverted version of IN A when the gate is low, and a non-inverted version when high. When only IN B is connected and IN A patched with a dummy cable (a cable that is not connected to another module), IN B can be switched off by a gate signal. If nothing is patched to IN A, the VOLTAGE READER GATE output is normalized to this input.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-mncch235754\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cbr role=\"presentation\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-5d5q1235739\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eThis module is available in 3U and 1U!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-foo\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cstrong\u003e\u003cspan\u003ekey features\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"flj0N M4Ji4\"\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-4yrw4125026\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eThree Utility Tools\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-qj6ga231467\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eVoltage Reader for Gates\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-fmms2231470\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eHold for Sampled Voltages\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-o7kv2231473\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eGate Switch\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-5ph851953\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eGate Switch Inverter\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-hdy62231476\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eTwo Hold Modes\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-0vsaw231479\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eInputs Normalised\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-i4frc215\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eAccepted input voltages for all inputs: -8V to +8V (CV \u0026amp; Audio).\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-6ueqg231482\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eAvailable in Intellijel and Pulp Logic Tile Format\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-ojmuc231485\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003eSkiff friendly\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-j75tz231457\"\u003e\u003c\/p\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"auto\" id=\"viewer-gblqp522058\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cstrong\u003e\u003cspan\u003especs \u0026amp; downloads\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"flj0N M4Ji4\"\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-sh5l2522062\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003ewidth: 4 HP \u0026amp; 20 HP\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-r0u9d522065\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003edepth: 30 mm\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"auto\" aria-level=\"1\" class=\"-Z5zC\"\u003e\n\u003cp class=\"dSoN4 _6cuve M4Ji4 SISpo\" dir=\"\" id=\"viewer-5fak8522068\"\u003e\u003cspan class=\"-buxx\"\u003e\u003cspan\u003epower: 35 mA @ +12V \/ 31 mA @ -12V\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.st-modular.de\/file-share\"\u003e\u003cspan class=\"Wp-Modular-Schrift-1-C Sz-Modular-Schrift-1-C-120px\"\u003eBuild docs\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.st-modular.de\/\"\u003ehttps:\/\/www.st-modular.de\/\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ST MODULAR","offers":[{"title":"pcb\/panel set","offer_id":57194095378696,"sku":"100035-1","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"full kit (SMD pre-soldered)","offer_id":57194095411464,"sku":"100035-2","price":39.99,"currency_code":"GBP","in_stock":true},{"title":"built module","offer_id":57194095444232,"sku":"100035-3","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/0902\/6312\/files\/CAUSE-EFFECT-3U.jpg?v=1777448707"}],"url":"https:\/\/pushermanproductions.com\/collections\/sample-hold.oembed","provider":"Pusherman","version":"1.0","type":"link"}