Description
This little module will let you power your Eurorack modules from any USB power source (5V). Just connect a B-Type plug into the USB jack and there will 300mA +12V and 150mA -12V available at the 2×5 male header on the bottom side of the PCB. Yes, you will need a power cable with 2×5 female connectors on both ends.
Power may be switched on and off via switch. An LED will indicate the current state.
This Power Supply Unit was designed to power one or two modules with low power consumption in very small cases.
See Product Gallery for missing silkscreen image
Details:
- USB PSU for Eurorack
- 300mA +12V
- 150mA -12V
- On/OFF Switch
- LED indication
- Skiff friendly
- 3U Eurorack module, 3 HP wide
- Power consumption: 5V USB Power
The module consists of one board and a pcb panel:
- FR4 Front Panel
- Main PCB
