Norns Shield (v191106) pcb only (part populated)

This listing is for a part smd populated Norns shield pcb.

All passives are pre-soldered, just the audio codec and crystal needed to complete the pcb.

Github Hardware

Github Software

minimal/tiny open-source/DIY shield for Raspberry Pi boards, providing hardware compatibility with the norns ecosystem.

• audio codec: CS4270
• audio jacks: 3.5mm stereo in/out, line level
• OLED: NHD-2.7-12864WDW3
• 3x pushbuttons, 3x rotary encoders

see the full BOM on Octopart

BOM is missing the header for the oled screen: 20 pin female 10mm high and corresponding male header strip to solder to the screen.

Raspberry Pi header – Mouser part number – 485-1992

see https://llllllll.co/t/diy-norns-shield for discussion.

monome.org