Description
Optional Mono Channel for STEREO SUM
YOU HAVE TO USE IT WITH THE STEREO SUM “MAIN MODULE” TO GET A FUNTIONAL UNIT!
STEREO SUM is a stereo mixer with a customizable amount of stereo or mono channels. You can decide yourself how many SUM CHANNELS you want to build and add to your SUM MAIN module. They are all connected via a flying bus cable and standard ribbon cables on the back. You can start with two channels and extend the mixer according to your needs and HP available.
Each STEREO or MONO CHANNEL has a mute switch, a one knob EQ, Pan, a Send knob that can be routed to two different destinations, a Level pot and an AFL (after fade listening) functionality, which allows you to audit your sounds on the headphones before you add them to the mix (pre Pan though). Fully counter-clockwise the channel is only routed to the headphones (AFL), turning it clockwise it will be smoothly subtracted from the headphone out and added to the main mix (Mix).
The SUM MAIN module has all output, send and return jacks, a master volume knob and a 6.3mm stereo headphone jack with a dedicated volume potentiomter. The Mix to AFL knob routes the main mix output to the headphone out in order to compare the channels that are in AFL mode with the main mix. This can be deactivated with a switch to only audit channels that are currently not send to the main output (AFL mode). Additionally there is a stereo input to integrade other mixers, like PHOEBE, SUM or uSUM for example.
All stereo inputs can also handle mono signals. If you want to save HP it might be a good decision to add some MONO CHANNELs to your STEREO SUM. The send channels can be set to be active either pre or post AFL per channel via a solder bridge. ‚Pre‘ means you can still hear the send/return way when it is in AFL mode (thus the channels signal is actually not audible in the main mix), ‚post‘ means send/return will only work when the channels signal is routed to the main mix. Each channel has two separate GAIN trimmer potentiometers adjustable from the front.
STEREO SUM is a true performance mixer aiming to be used in live situations.
If you want to have a more detailed EQ control over your mix STEREO EQ is a perfect addition to your STEREO SUM Mixer.
Details:
• Stereo Mixer
• Customizable Amount of Stereo or Mono Channels
• EQ per Channel
• Two Send/Returns
• AFL Mode to Audit Sounds
• Mute Switch per Channel
• SUM MAIN Stereo Input to Integrate other Mixers
• Mix to Headphone Knob for Sound Comparison
• Skiff Friendly
• Wrong Polarity Protection
• 3U Eurorack module, 8 HP + 6 HP + N HP wide
• Power consumption: 65 mA at +12 V and 42 mA at -12 V for SUM MAIN and two SUM CHANNELS
Each module consists of two boards:
• Front PCB Panel
• Main PCB
- 15 mA +12V
- 11 mA -12V
- 0 mA 5V
- 27 mm deep
